Corteco 49446661 Wheel Hub Shaft Seal

Description

The Corteco 49446661 is a wheel hub shaft seal designed to prevent lubricant leakage from the wheel hub assembly. It is used in the suspension and steering system, specifically within the hubs and bearings, ensuring smooth wheel rotation and optimal performance. This seal features precise dimensions of 36 x 206 x 206 mm and is manufactured in Japan. The high-quality materials and construction of this seal provide excellent resistance to wear, heat, and contaminants, extending the life of the wheel hub and reducing maintenance costs.

Key Features & Benefits

This little seal’s job is pretty simple, really. It prevents grease from leaking out of your wheel hub and keeps dirt and water from getting in. It sits right where the axle shaft comes out of the hub assembly. It's basically a barrier, a sort of gasket if you will. Think of your wheel hub as the center of the wheel, where it spins. Inside that hub, you’ve got bearings that need to be lubricated with grease to keep everything turning smoothly. The shaft seal keeps that grease where it belongs, and stops nasty stuff from damaging the bearings. It’s part of the whole suspension and steering system, ensuring your wheels move as they should.

Symptoms, Risks & Replacements

If this seal fails, you’ll start losing grease. That means the bearings will quickly wear out. You'll notice if it’s really bad—you'll likely get a grinding or rumbling noise coming from the wheel, especially when you turn. It can even lead to wheel wobble or, in a worst – case scenario, bearing failure while driving, which is obviously a safety issue. Replacing it is a lot cheaper and easier than replacing a whole hub assembly or dealing with a breakdown. You can find these fairly easily, actually – a lot of folks get them from places like Fixparts Online, but any good auto parts store will carry them. They’re a small part, but they do a big job.

Warranty Information

Corteco Wheel Hub Shaft Seal (MPN 49446661) comes with a 1-year warranty.