Febi 100989 Oil Drain Plug with O-Ring

Description

The Febi Oil Drain Plug with O-Ring is a critical engine component used to seal the oil pan, preventing oil leakage after each oil change. This part is specifically designed for vehicles adhering to the Euro 6 emission standard, and is compatible with a range of other standards as well. Constructed from plastic, this drain plug offers a lightweight yet durable solution for maintaining oil containment. With dimensions of 45 x 45 x 60 mm and a thread outer diameter of 13 and 21, this part offers a precise and secure fit. Manufactured in Turkey and identified by MPN 100989, this drain plug improves engine reliability through a consistent and leak-free seal.

Key Features & Benefits

Basically, this plug seals the oil pan. It’s what you remove when you change your oil, and then you tighten it back up to hold all the oil inside the engine. The o – ring is a small rubber washer that sits around the plug itself; it helps create a really tight seal, preventing leaks. Think of it as the stopper in a bathtub. Without it, all the oil would just drain out and your engine would quickly be damaged. It’s located on the very bottom of your engine, on the oil pan. It’s a pretty simple part, but vital.

Symptoms, Risks & Replacements

It’s important because oil is the lifeblood of your engine. If that plug fails, or the o – ring degrades, you’ll lose oil. Losing oil leads to seriously expensive engine damage pretty quickly. You’ll notice if you have a leak, usually as an oil spot where you park, or you might smell burning oil. Replacing this plug and o – ring proactively as part of routine maintenance is way cheaper than an engine rebuild. You can find these pretty easily, sites like Fixparts Online usually have a good selection. It’s a small piece, but a failure can cause a big headache, so it’s worth keeping an eye on and replacing when needed.

Warranty Information

Febi Oil Drain Plug with O-Ring (MPN 100989) comes with a 3-year warranty.