Wabco 9753030840 Unloader

Description

The Wabco 9753030840 Unloader is a critical component within the air processing unit of air brake systems, primarily used in commercial vehicles. It regulates air pressure, ensuring efficient and safe braking performance. This unloader features a calculated volume of 1.66, a cut-out pressure of 9.5 bar, a maximum operating pressure of 25.0 bar, and accepts port threads of M22 x 1.5. It is designed for mounting with 2x Ø 8.8 mm bolts and operates within a temperature range of -40°C to +80°C. The device is an OE specification part, providing reliable and consistent performance, and is equipped with a one-way valve. Its dimensions are 68 x 108 x 226 mm.

Key Features & Benefits

This little guy basically manages the air pressure in your air brake system. Think of it like a safety valve. It releases excess air pressure from the compressor before it reaches the air tanks. It doesn’t create air pressure, the compressor does that, but it makes sure things don’t get overloaded. It’s a pretty simple device, mechanically, but it plays a crucial role. It has an inlet where air comes from the compressor, an outlet going to the tanks, and a valve that opens and closes based on that pressure. In your vehicle, it’s part of the air processing unit, right after the compressor. Air gets compressed, then comes to the unloader. Once the tanks are up to pressure, the unloader automatically opens and vents any extra air to the atmosphere. It’s all about maintaining a consistent, safe level of air pressure for your brakes – and other air – powered things like suspension, if you've got it. It prevents the system from becoming over – pressurized which can damage other components.

Symptoms, Risks & Replacements

It’s important because over – pressurizing the system can cause a lot of trouble. Things like burst air lines, damaged brake chambers, even a failing air dryer – and that leads to brake failure, plain and simple. You’ll notice if it’s failing because you might hear air constantly venting, even when the system should be holding pressure. Sometimes it’s a gradual thing, a slow leak, other times it’s pretty obvious. It’s a relatively inexpensive part to replace, and it’s a good preventative maintenance item. We carry a lot of these at Fixparts Online, and replacing it regularly can save you big headaches—and bigger repair bills—down the road. It really acts like a shield for the rest of your air brake components.

Warranty Information

Wabco Unloader (MPN 9753030840) comes with a 1-year warranty.